1 Core Field Installable Connector SC APC FTTH GPON Quick Splice Connector
1Core SC APC FTTH GPON Field Mecahncial Cold Splice Connector Green Quick Installation PEI
Optical fiber fast connector is a kind of connector which can solve the problem of ultra long distance wiring and fiber to the home project, it make fiber terminations fast, easy and reliable and do terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar excellent transmission parameters as standard polishing and splicing technology. We can greatly reduce the assembly and set up time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site.
SC UPC 60MM Quick Connector Assembly SC APC 55MM Quick Connector Assembly
For 2*3mm drop cable For 0.9mm round cable
Field Installable Connector SC Technical parameter:
| Model | YDFIC-D-SA-L | YDFIC-D-SA-S |
| Dimension | 60mm*9mm | 55mm*9mm |
| Insertion loss | <0.5dB, average≤0.3dB |
| Return loss | ≥50dB |
| Fiber type | Single mode, multimode |
| Fiber diameter | 0.9mm, 2.0mm, 3.0mm, 2.0*3.0mm |
| Working temperature | -40 ~+750C |
| Application | Fiber to the home |
| Dimension | 60mm*9mm | 55mm*9mm |
| Standards | ISO9001 |
Quality assurance For Field Installable Connector SC:
Four times of grinding and two times of quality inspection
Step 1: 30um grinding
Step 2: 9um grinding
Step 3: 1 um grinding
Step 4: transparent polishing
Step 5: Optical fiber endface detection
Step 6: Insertion loss, return loss detection
Field Installable Connector SC Features
- Each ferrule has been tested within 0.5dB of insertion loss, reach TELECOM standard;
- Adopt Three Circle A-class ceramic ferrule, improves product stability, low loss and small change;
- Large scale production, mature technology, exquisite, which ensure the quality of connectors;
- It has strong practicability and can be reused for more than 15 times;
- Stable operation performance, low insertion loss, low use cost, low maintenance rate and fast installation speed;
- Each 100pcs will equip with 1pc length fixing device;
- Humanized structure design: preset limit point of drop cable at the boot, and automatically generate a small micro bend according to the correct cutting length of the product (see below figure). The micro bend indicates that the optical fiber has been in good contact with the embedded optical fiber, and the micro bend must exist, but not too large, otherwise the loss during the period will be affected.
SC Fiber Cable Connectors Structure diagram
What is the difference of long and short type?
There are 55mm and 60mm. The long type is flat to lay the drop cable and the short type is vertical to lay the drop cable
SC fiber connector Application:
Broadband campus network, Fiber to the home, Broadband limited TV, Intelligent broadband, Fiber to the building
Quick Assembly Connector SC Production Line
Field Installable Connector Pack information:
100pcs/each inner box, 1000pcs / carton box,
HOW TO USE?
The operation is simple, insert the optical fiber to the limit point, automatically generate a small amount of bending, keep your radian, do not straighten, screw the nut first and then lock the switch.
Step 1: take out the boot and put it into the drop cable
Step 2: peel off the 5cm drop cable sheath with drop cable stripper
Step 3: scrape the coating outside the length fixer with Miller pliers
Step 4: wipe the fiber core with dust cloth
Step 5: cut the core with a cutter
Step 6: insert the fiber core into the fast connector to resist the embedded core
Step 7: use the boot on the drop cable to clamp the cable
Product Tags:
|
|
1 Core Field Installable Connector SC APC FTTH GPON Quick Splice Connector Images
|
